ChrisTrains 186 - Brakes

Plaats hier als je tegen problemen aanloopt met het installeren van Add-Ons, gebruik ervan, enz.
Lees eerst de stickies voordat je een nieuwe vraag stelt.
Plaats reactie
Gebruikersavatar
Peter749
Berichten: 41
Lid geworden op: 11 feb 2021, 14:36
3
Gegeven waarderingen: 18 keren
Ontvangen waarderingen: 12 keren

ChrisTrains 186 - Brakes

Bericht door Peter749 »

Is it possible to modify the Chris Trains Class 186 locos so the brake handle springs back from B+ to Const?
Like on the Class 66/266 when you apply the brakes and reduced the pressure to say 4 bar you let go and it springs back to "lap"

I have to try and look at the Brake Handle and the view ahead when you place the Brake Handle to B+ it does not keep lowering the pressure.
Could something be modified in the .bin file?

Thanks

Peter
(Apologies if this is the wrong section)

Gebruikersavatar
Peter749
Berichten: 41
Lid geworden op: 11 feb 2021, 14:36
3
Gegeven waarderingen: 18 keren
Ontvangen waarderingen: 12 keren

Re: ChrisTrains 186 - Brakes

Bericht door Peter749 »

I asked Chris of ChrisTrains and he kindly replied that it was not possible to change the brakes to act PBL Style

Oh well...

Peter

Gebruikersavatar
Peter749
Berichten: 41
Lid geworden op: 11 feb 2021, 14:36
3
Gegeven waarderingen: 18 keren
Ontvangen waarderingen: 12 keren

Re: ChrisTrains 186 - Brakes

Bericht door Peter749 »

As a footnote I found by changing a single number in the loco bin file it no longer goes in to Emergency/SOS

At least I can drive the loco without having emergency stops :D

Peter

HeroicNonsense
Berichten: 89
Lid geworden op: 07 apr 2020, 13:46
4
Gegeven waarderingen: 65 keren
Ontvangen waarderingen: 22 keren

Re: ChrisTrains 186 - Brakes

Bericht door HeroicNonsense »

Peter749 schreef:
26 feb 2021, 17:26
As a footnote I found by changing a single number in the loco bin file it no longer goes in to Emergency/SOS

At least I can drive the loco without having emergency stops :D

Peter
Would you be so kind to share that single number and the file it's in? :sweat_smile:

I'm running into the same issues with accidentally applying SOS mode (emergency brakes) due to occasional input lag between my machine and the DaaS that I use to run TS2021.

Thanks in advance :wink:

Gebruikersavatar
Peter749
Berichten: 41
Lid geworden op: 11 feb 2021, 14:36
3
Gegeven waarderingen: 18 keren
Ontvangen waarderingen: 12 keren

Re: ChrisTrains 186 - Brakes

Bericht door Peter749 »

HeroicNonsense schreef:
23 mar 2021, 11:27
Peter749 schreef:
26 feb 2021, 17:26
As a footnote I found by changing a single number in the loco bin file it no longer goes in to Emergency/SOS

At least I can drive the loco without having emergency stops :D

Peter
Would you be so kind to share that single number and the file it's in? :sweat_smile:

I'm running into the same issues with accidentally applying SOS mode (emergency brakes) due to occasional input lag between my machine and the DaaS that I use to run TS2021.

Thanks in advance :wink:
Hello,

It is a quick change to do but you have to do each loco separately

I just used Notepad and Serz

Double Click on the CT NS Class 186.bin and it creates CT NS Class 186.xml
Open the xml version in Notepad and search for VirtualBrake

You will find this section
<ControlName d:type="cDeltaString">VirtualBrake</ControlName>
<DefaultValue d:type="sFloat32" d:alt_encoding="000000000000F03F" d:precision="string">1</DefaultValue>
<MinimumValue d:type="sFloat32" d:alt_encoding="00000000000008C0" d:precision="string">-3</MinimumValue>
<MaximumValue d:type="sFloat32" d:alt_encoding="0000000000000040" d:precision="string">2</MaximumValue>

On this line change the value from 2 to 1
<MaximumValue d:type="sFloat32" d:alt_encoding="0000000000000040" d:precision="string">1</MaximumValue>

Save the file and close it > Right Click on this xml file and Open With Serz
That writes the instruction back to the main file and the date/time change

Give the loco a run :)

Just a slow job if you have the DCR Repaint to do as well

Peter
Deze gebruikers waarderen Peter749 voor dit bericht:
HeroicNonsense

HeroicNonsense
Berichten: 89
Lid geworden op: 07 apr 2020, 13:46
4
Gegeven waarderingen: 65 keren
Ontvangen waarderingen: 22 keren

Re: ChrisTrains 186 - Brakes

Bericht door HeroicNonsense »

Thanks! This works! Now to the tedious job of going through all the repaints...

To everyone reading along: the CT NS Class 186.bin file recides in each of the \Version_* folder inside \Assets\ChrisTrains\NS Class 186 and ICRmh wagons\RailVehicles\CT NS Class 186\

====

Voor iedereen die meeleest, het CT NS Class 186.bin bestand staat in elk van de \Version_* map binnen \Assets\ChrisTrains\NS Class 186 and ICRmh wagons\RailVehicles\CT NS Class 186\

Gebruikersavatar
Peter749
Berichten: 41
Lid geworden op: 11 feb 2021, 14:36
3
Gegeven waarderingen: 18 keren
Ontvangen waarderingen: 12 keren

Re: ChrisTrains 186 - Brakes

Bericht door Peter749 »

For some reason this Fix to stop the brake handle going to emergency does not work any more.

The Brake handle will spring back out of Emergency if you go that far
But there is nothing to stop you accidentality going to the Emergency Position.

Any ideas please

Peter

Gebruikersavatar
jan366
Berichten: 22
Lid geworden op: 22 mei 2020, 18:29
4
Gegeven waarderingen: 8 keren
Ontvangen waarderingen: 4 keren

Re: ChrisTrains 186 - Brakes

Bericht door jan366 »

Dit lijkt me interessant.
Maar ik begrijp niet volledig over wat men het heeft?

Misschien een kleine Nederlandse vertaling?
Jan

Plaats reactie

Terug naar “Vragen”